Loading Auctions

Paulsen – Farm Equipment Auction

Paulsen – Farm Equipment Auction

ESTATE FARM EQUIPMENT AUCTION

JD 9660 STS Combine & Heads, JD 8230 MFWD Tractor, JD 7430 Premium MFWD Tractor w/JD 741 Loader, JD 4430 Dsl. Tractor, JD 4020 Dsl. Tractor w/Cab & JD #148 Loader, JD 4020 Dsl. Tractor, JD 2200 50’ Field Cult., Krause Dominator 11 Shank Slicer Ripper/Leveler, Other Farm Equipment, 2003 Mack  DS 600 Semi Tractor, 1996 Mack E7-427 Semi Tractor, 1985 Ford LTL 9000 Semi Tractor 1997 Timpte Super Hopper 42’ Aluminum Grain Trailer, 2003 Shopmade Step Deck 40’ Semi Trailer Livestock Equipment, Commercial Machinists & Other Quality Shop Tools & Other Misc. Items

In order to settle Gary Paulsen Estate and Paulsen Angus Farms, we will offer the following personal property at auction at the farm located at 1566 US Hwy. #75, Pipestone, MN; from Pipestone, MN (McDonald’s Corner at the Jct. of Hwy’s #30 & #75 – 5 ½ miles north on Hwy. #75; from Lake Benton, MN (Jct. Hwy’s. #75 & #14 – approx. 13 miles south on Hwy. #75; or from Ward, SD – 7 ½  miles east to Hwy. #75, then 5 ½ miles south on Hwy. #75.

THURSDAY AUGUST 20, 2020                                                     SALE TIME:  11:00 AM

Live and Online Bidding via Proxibid on Major Shop Items & Farm Equipment to Begin at 1:00 PM.

Auctioneer’s Note:  This is an EXCEPTIONALY NICE line of Farm Machinery, Shop Equipment & Livestock Equipment that must be seen to be appreciated!  Due to the COVID-19 pandemic – Social Distancing and Other Precautions will be Observed.  Individuals that have been exposed to the virus, have symptoms of COVID-19, have compromised health conditions, or that or have a fever or are feeling ill, are requested not to attend in person.  Online Live Simulcast Bidding will be available through Proxibid. 

COMBINE & HEADS:  JD 9660 STS Combine w/Lateral Tilt, Fore & Aft, Rock Trap, Tank Ext., CM Chopper, 20.8×42” Drive Tires & Duals, 28Lx26” Rear Tires, 2,618 Machine & 2,011 Sep. Hrs. – SN HO9660S712130 (2005); JD 608C Stalk Master 8 Row 30” Chopping Corn Head w/Hyd. Deck Plates, Header Height Control & Stalk Stompers  – SN 1H00608CHDC756189 (2013); JD 630F 30’ Hydra-Flex Bean Head w/Dual Speed, Low Stone Dam- Poly Good – SN H00630F716056 (2006); EZ Trail #672 Low Rubber Bean Head Transport.

TRACTORS, GPS & OTHER ACCESSORIES: JD 8230  Dsl. Tractor w/Cab, Greenstar Ready, Quad Hyd. w/Power Beyond, 3 Pt. w/Quick-tach Hitch, 12 Frt. Wts. & Bracket, 1,000 PTO, 380R/80R 34” Frt. & 18.4 x46” Rear Tires & Axle Mt. Duals, 3,565 Hrs. – SN 8230P024489 (2008) – One Owner; JD 7430 Premium MFWD Dsl. Tractor w/Comfort Guard Cab & JD 741 Loader w/Grapple Bucket & Hammerstrap Connection, 20 Speed Powershift, Joystick, Triple Hyd., Block Heater,  3 Hyd., 3 Pt, 1000/540 PTO, 18.4×42” Tires, 2 Rear 205Kg Inside Wheel Wts., 5,520 Hrs. , SN RW7430K007970 (2008); Set of 18.4×42” Axle Mt. Duals w/9 Bolt Hubs – To be Sold Separate; JD 4430 Dsl. Tractor w/SG Cab, Powershift, Triple Hyd., 3 Pt., 1000/540 PTO,  18.4×38 Rear Tires – SN 076173 (1973); JD 4020 Dsl. Tractor w/ JD #148 Loader & 7’ Bucket, Wide Front, Synchro Shift, Wide Front, Dual Hyd., Rear Wheel Wts., 18.4×34” Rear & 11,00×16” Front Tires – Approx. 10,000 Hrs. – SN 192858 (1968); JD 4020 Dsl. Tractor w/Wide Front, Synchro Shift, Sgl. Hyd., 16.9×34” Tires – Approx. 10,500 Hrs. – SN172065 (1967); Starfire 3000 Globe/Receiver w/SF II, 2630 Display w/Auto Trac, Section Control, Swath Control, Guidance & Mapping – SF II Subscription not currently active; JD #58 Loader w/30 Series Mts. & Grapple Bucket; JD 7’ – 4 Tine Grapple Bucket; Double Tine MDS Bale Spear; Miller Grab-Tec 7’ Bucket w/5 Tine Grapple – Skid Steer Mts. – like new; Set of 18.4×38” Duals & Pr. of 10 Bolt JD Hubs w/4” Spacers; Year-A-Round Tractor Cab.

TILLAGE, SPRAYING, HAYING & OTHER FARM EQUIPMENT:  JD 2200 50’ Field Cult. w/Accu-Depth & 3 Bar Harrow; Krause Dominator 11 Shank Slicer Ripper/Leveler w/Covering Coulters & Rd. Bar Rolling Basket – VG Cond.; Hardi CM 1500 Commander Pulltype Sprayer w/1,500 Gal. Tank, 120’ Booms, Triple Nozzles, Dual 320/90R46 Tires &  450 Monitor; JD 568 Mega Wide Plus Round Baler w/Hyd. Pickup, Variable Core, Pushbar, Net Wrap, 21.5×16” Tires –  14,635 Bales (2007); Kuhn GMD 600  7’  Disk Mower, 540 PTO – 3 Pt.; Vermeer R 2300 “V” Basket Rake; JD #2460 12‘ Grain Drill on Low Rubber; Fair Mfg. 8’ Dbl. Auger & Dual Hyd. Spout HD Snowblower; JD 1350/1450 6 Bottom Plow;  JD 400 28’ Rotary Hoe – 3 Pt. w/End Transport; 120 Gal. Boomless Pasture Sprayer – 3 Pt.; Hutchinson 10”x26’ Belt Conveyor w/Elec. Motor;  Bush Hog 5’ Rotary Mower – 3 Pt; Bradford Mdl. 224 Gravity Wagon w/Ext. & Gear; Westendorff Running Gear; 3 Pt. Hyd. Adjustable Pallet Fork; 18’ Belt Conveyer (needs motor); 4 Unit Oil Rack w/4-80 Gal. Poly Tanks on HM Stand; Chemical Inductor w/5.5 HP Transfer Pump & Motor  on Shopmade Frame; Transfer Pump w/5.5 HP Motor; Shopmade Transfer Pump Hose Reel w/Approx. 100’ of Hose; 3- 1,500 Gal. Poly Tanks; 1,000 Gal. Ammonia Tank; Steel Upright 4,000 Gal. Liq. Fert. Tank; 2- 1,000 Gal. Fuel Tanks w/Elec. Pumps; 250 Gal. Fuel Tank w/Elec. Pump; Shopmade 3 Pt. Hyd. Log Splitter; 7 Sections of Well Pipe – 3” & 4”; Steel Truck Flatbed, Other Scrap Iron & Misc.

TRUCKS, TRAILERS & GRAIN HANDLING EQUIPMENT:  2003 Mack  DS 600 Semi Tractor (Green) w/Day Cab, Mack Dsl. Eng., Eaton Fuller 9 Spd. Hi-Low Trans., Air Ride Seat, 22.5 Tires, 658,814 Miles; 1996 Mack E7-427 Semi Tractor (Blue) w/Day Cab, Mack Dsl. Eng., 13 Speed Maxi-Torque 13 Speed Trans. w/Extended Range Splitter, Air Seat, 24.5 Tires, 896,605 Miles; 1985 Ford LTL 9000 Semi Tractor (Red & White) w/Day Cab, Eaton-Fuller 10×2 Spd. Trans, Cummins Dsl. Engine, Tw. Screw, 11Rx22.5 Tires, 889,025 Miles; 1997 Timpte Super Hopper 42’ Aluminum Grain Trailer w/60” Sides, Manual Ag Hoppers, Shurlok Roll Tarp & RolTec Elec. Tarp Roller &  11Rx22.5” Tires; 2003 Shopmade Step Deck 40’ Semi Trailer – 30’ Main Deck & 10’ Step Deck & 10.00×20” Tires.

PICKUP, ATV & GOLF CART:  1992 Chev. 3500 Dually Pickup w/Ext. Cab & Long Box (Blue) w/Gas Engine, 5 Spd. Manual Trans. w/OD, 5th Wheel Plate – 233,350 Miles; 2009 Yamaha Grizzly 700FS 4×4 4 Wheel ATV ; 1999 Club Car Golf Cart – Elec. w/Radio & Roof – Needs Batteries.

LIVESTOCK EQUIPMENT:  Farm Aid #430 Mixer Feed Wagon w/Weightronix Scale w/2 Digital Read Boxes, Poly Liner & Right Side Unload – SN23742; Haybuster #2650 Bale Processor w/Hyd. Lift Gate & 1,000 PTO; NH #195 Tandem Axle Manure Spreader w/Poly Floor & Slopgate; JD 3T Stack Mover; MFS #3612 – 12‘ Box Scraper w/Side & Lateral Tilt; Rawhide Portable Livestock Corral w/7 Panels on One Side & 5 Panels on the Other w/Alley; 5 – 24’ & 1 – 12’ Portable Cattle Wind Panels; 2 – 24’ Port. Wind Panel Steel Frames; 24’ Common Sense Steel Portable Calf Shelter; Vern’s Calving Pen w/Qwik Way Headgate; Easy Way Cattle Oiler/Mineral Feeder; Hyd. Wire Winder; HM Bale Spear; 100+ Steel Fence Posts & Misc.

COMMERCIAL METALWORKING & OTHER SHOP ITEMS:   LeBlond Commercial Metal Working Lathe w/6’ Bed & 15” Swing – Hydro Shift w/X&Z Axis w/Digital Readout, 3 Jaw Chuck & Tooling – 3 Ph.;  Bridgeport Series I – 2 HP – 3 Phase Milling Machine w/Variable Spd. Drive & 9”x42” Table w/Clamping Accessories; 2– Dividing Heads for Milling Machine; Boring Head for Milling Machine; Kurt 6”x8” Vise; Kurt 6”x4” Vise; Shopbuilt Hyd. “H” Frame Elec. Over Hyd. Press w/50” Opening – Approx. 100T – 8” Bore Cylinder w/30” Stroke & 3 ½” Ram, 7 ½ HP 3 Ph. Elec. Motor & Solid Alum. Blocking; Miller MT45E Welder w/Miller S-54E – 4 Spool Feeder on Shop Built Cart w/Feeder Boom – 3 Ph.;  Gantry “A” Frame – 11 ½’ Wide x 12’ Tall & 8’ Wheel Width – 4,000 lb. Cap. 2/2T 220V Chain Hoist w/Trolley on 10” Steel Casters; Clausing Variable Speed 1 ½ HP Comm. Drill Press; Jet HBS-9M Horizontal Band Saw – 8”x12” – 1 ½ HP 220V Sgl. Ph.; Sun Bench Top Drill Press – 110V; Proto Torque Multiplier- 200 lbs. in & 1,200 lbs. out; #15 Anvil – 4”x23” – approx. 125 lbs.; Sunex 8” Dbl. Wheel Bench Grinder on Stand; Smith Oxy Acetylene Torch Set w/Regulator, Hose, & Tips on Cart; Hyd. Shop Press; Parts Washer; Steel Plate Material Rack – 7’x5’ on Wheels; 4’x5’ Steel Work Table w/1” Steel Plate Top on Steel Wheels; 30”x30” Steel Work Table w/Hyd. Adjust. Ht.; 4’ Tall 2’x4’ Steel Work Tables on Wheels; 6 HM 4 Roller Adj. Work Stands; 2- Steel Saw Horses; 3T Chain Hoist; CM 2T Chain Hoist; Makita Chop Saw on Rolling Stand; 21 Drwr. Craftsman Tool Chest on Shopmade HD Stand w/Extra Center Stg. on Steel Casters; Blue Point ¾” Air Impact; Num. Asst. Air Tools; Craftsman SAE & Metric Wrenches; Craftsman Deep Well & Standard Sockets – 3/8”, ½” & ¾” Drives; Little Giant Greenfield #37 ½ Tap & Die – ¼”-1” (all fine thread); Asst’d. Hobart & Other Clamps – 8”-16”;  2-  7’ Tall x 12’W 143 Hole Wdn. Parts Bins; 3 ½’ LP Catalytic Heater; Lg. Assortment of Nuts, Bolts & Shop Supplies.

HOUSEHOLD ITEMS & MISC.:   Large Green Egg Smoker/Grill; Nordic Trak; Antique Barn Cupola;

PAULSEN ANGUS FARMS, INC. – Owner

Gary Paulsen Estate – Kathy Paulsen & Jeff Paulsen, Owners

For additional information contact Jeff Paulsen – ph. 507-215-0760 or the Auctioneers

CHUCK SUTTON – Auctioneer and Land Broker – MN Auctioneer Lic. 59-26 – Sioux Falls, SD – Ph. 605-336-6315, Flandreau, SD- Ph.605-997-3777

& Pipestone Realty, Pipestone, MN – Ph. 507-825-3389

DEAN STOLTENBERG – Auctioneer & RE Salesperson – MN Auctioneer Lic. # 59-38 – Jasper, MN – Ph. 507-348-7352

 JARED SUTTON – Auctioneer & RE Broker Assoc. – MN Auctioneer Lic. #59-72 – – Flandreau, SD – Ph. 605-864-8527

Clerk: Chuck Sutton Auction Service, LLC

 

Date

August 20

Time

11:00 am

Location

1566 US Hwy. #75, Pipestone, MN

Auctioneers

Chuck Sutton
Jared Sutton
Dean Stoltenberg

Share this Event

REGISTER FOR THIS EVENT